s355n angle bar,s355n steel plate,s355n hollow section

High-strength structural non-alloy steel supplied to EN 10025-3 in S355N grade, offered as angle bars (L-sections), hot-rolled plates and hollow sections. Material is produced with normalized heat treatment and subjected to low-temperature impact testing at the steel mill to satisfy EN 10025-3 requirements, making it suitable for welded and load-bearing structural applications.

Key features

• Conforms to EN 10025-3 (S355N) specification
• Nominal minimum yield strength: 355 MPa
• Normalized heat treatment applied at mill for improved toughness and homogeneity
• Low-temperature impact testing performed at mill per the standard
• Good weldability and suitability for fabrication

Available product forms

• Angle bars (L-sections)
• Hot-rolled steel plates and sheets
• Hollow sections (square/rectangular tubes)

Typical applications

• Structural steelwork and building frames
• Bridges and civil engineering structures
• Fabricated welded assemblies and heavy equipment

Notes for buyers

• Sizes, thicknesses and dimensional tolerances vary by stock and mill runs; contact your supplier for available inventories and dimensional ranges
• Mill test certificates and material test reports can be provided on request to verify heat treatment and impact test results
• For project quotes, specify required form (angle/plate/hollow), dimensions, quantity and required delivery/testing documentation