Jxf Fluoroplastic Liner Axial Flow Pump

JXF Fluoroplastic liner axial flow

The flow parts of the pump are made of PFA material with high quality.

JXF fluoroplastic liner axial flow is highly adaptable to corrosive liquids such as nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid and strong oxidizer.

The pump has the good corrosion resistant for the corrosive liquids.

Its corrosion resistance is far better than high nickel alloy, no.

20 alloy, even more than high silicon cast iron etc.

Excellent wear resistance

The pump adopts a special process of drying and pressing, in which the thickness of fluorine lining of the steel lined compound pump body is more than 10mm, the thickness of fluorine of the splint pump body is more than 25mm.

And the special treatment is carried out on the inner wall of fluorine, the resistance to ferrous sulfate abrasion is the first in the world.

Excellent high temperature resistance

Because the pump has excellent thermal property, self-lubrication and impact resistance, the impeller and other key parts of fluoroplastics will not be cracked due to impact, making up for the ceramic pump, high silicon cast iron pump fragile defects.

The performance of the whole machine is excellent, smooth operation and in the -30 to 150 DegC harsh environment the pump can be safely used for a long time.

(the maximum temperature for waste acid concentration is 130DegC, while the melting point of fluorine material is 360DegC)

Easy to disassemble and easy to repair

Because the impeller, pump cover, shaft sleeve are all made of fluorine material, the weight of the pump is greatly reduced, the rotor part can be easily and conveniently removed from the pump body, so the dismantling, unloading, loading can be easily completed.

Avoid silicon iron pump need to be carefully repaired and afraid of being broken.

To sum up, this pump is the most ideal and suitable special pump for the concentration of waste acid in titanium dioxide.