The coating thickener is a device for the non-destructive measurement of coatings (lacquers, paints, plastics, etc.) on ferrous (steel, iron) and non-ferrous metal bases. The external sensor of the coverage espesimeter allows measurement in places of difficult access.
Rank:
Faith: 0 ... 2000 μm/NFe: 0 μm ... 2000 μm
Precision:
± (2% of value + 1 μm)
Resolution:
0.1 μm (<100 μm) / 1 μm (>100 μm)
Materials:
For measuring in iron/steel and non-ferrous metals
Minimum convex radius of curvature:
5mm
Concave minimum radius of curvature:
25mm
Minimum measuring area:
Ø17mm
Minimum base weight:
0.2 mm (iron base)
0.05 mm (non-ferrous base)
Probes mode:
Base auto-detect mode (Fe+NFe)
Magnetic induction mode (Fe)
Eddy current mode (NFe)
Measurement modes:
Individual and continuous measurement
Calibration:
Multi-point calibration (1 ... 4 points for each group)
Zero point calibration
Units:
μm, mm, thousandths of an inch
Data transfer:
USB 2.0
Memory:
1 volatile measurement group (DIR mode)
4 non-volatile measuring groups with automatic recording and max. 2000 values (GEN mode)
Statistical function:
Number of measurement values, average, maximum, minimum, standard deviation
Alarm:
Indication when exceeding the lower and upper alarm level
Automatic shutdown:
At 3 minutes
Feeding:
3 x 1.5V batteries, AAA type
Screen:
LCD, 128 x 128 pixels
Indication:
Battery Status / Error Detection
Operating conditions:
0 ... +50 °C / 20 ... 90 % Hr non-condensing
Storage conditions:
-10 ... +60 °C / 20 ... 90 % Hr non-condensing
Dimensions:
143x71x37mm
Weight:
Approx. 271 g (with sensor and batteries)
1 x PCE-CT 80-FN2 Coating Thickener (Cable length: 1m)
3 x AAA batteries
1 x Instruction Manual
1 x Carrying case
1 x Set of calibration standards
1 x Calibration bases (Fe and NFe)
Product Details
Supplier
