Product description
ECO-FRIENDLY ANTIGRAFFITI PROTECTOR SLG 500
5 L claw
Long-lasting water-based microcrystalline wax protection for all types
Protects against spray graffiti, pen, brush or roller,
provides extra-strong protection painted on pens as well as
protect against pollution It is a permeable product and allows
Surface
Correctly applied, its duration is approximately 5 years Prevents
penetration of graffiti into the substrate, is a sacrificial protection, that is,
should be renewed after eliminating the SLG 500 is It's
transparent, not yellowing and free of
Preparation
It cleans the surface of graffiti or any other type of contamination, such as
caused by traffic pollution, wax, oil, paint residues, it is covered and
protect windows in a way The ideal temperature for the application
external temperature will be between 10 and 35o The minimum temperature will be 4o Relative humidity
should not exceed 95%.
OUTER PROTECTION
The product is shaken well before it can be applied with low spray
pressure, airless gun, brush or Protection should be applied in two layers,
leaving a drying time between It can be applied on a surface
wet, but not- The squirts and/or excess product can be easily
eliminated with water, completing the work he continued
INTERIOR PROTECTION
Painted surfaces can be protected using roller or La
protection should be applied in three
REMOVING GRAFFITI ON THE OUTSIDE
Method 1 –
It is removed only with hot pressure water (90oC and 80-100 bar), then renewed
protection, only in the area where protection has been
Method 2 –
Graffiti is removed with a paint cleaning product (SLG 150), removed and
lightens a damp cloth in water, or cold water to press
Renewal of surface protection
When removing a painting, the protective layer is usually due to
renew protection with two
Dosage
Use
CLEANING, PROTECTION AND MAINTENANCE OF EXCLUSIVE PRODUCTS
Malpica Alfindén - C/ Chopo, no. 976 108 153
50171 La Puebla de Alfindén (Zaragoza). 976 455 780
:
Performance
It depends on the type of surface material in each case, its porosity, capillaryity,
In concrete, brick or similar: 0.1-0.15 l/M2 per
In sandstone, plaster and other porous surfaces: 0.15-0.2 l/M2 per
Properties
• Supplied in plastic containers of 5 or 25
• Specific weight: 0.99
• Ph:
• Contains solid matter 10.5%.
DRYING TIME
The protected surface is water resistant and completely to graffiti- after
2 hours of application, and is completely dry at 4 the final effect of
protection is achieved at 72
Appearance
Transparent, virtually invisible depending on the type of Resistant to
ultraviolet rays, weather conditions, water and
Precautions
Protective clothing should be used and precautionary measures taken
Storage
Stored in the original container closed at a temperature above 0o
Expiration
Approximately 12 months in pack
